Operado pela ONE BOM LIMITED (Hong Kong) · equipes em Shenzhen, Hong Kong e EUAResposta em 2 horas úteis (UTC+8)Cada lote inspecionado antes do envioEscrow / PayPal / T/T / L/C

Hot-swap controllers — peças em estoque

Em 18 de setembro de 2026, a TI-ADI (ONE BOM LIMITED) tem 219 peças de Hot-swap controllers disponíveis para venda, das quais 0 podem ser enviadas em até 7 dias.

Código da peçaFabricanteEncapsulamentoPrazo de entrega
LM5067MMX-2/NOPB
-9-V to -80-V hot swap controller with power limiting
Texas Instruments10-VSSOP (DGS)
TPS2491DGS
9-V to 80-V hot swap controller with power limiting and Auto Retry
Texas Instruments10-VSSOP (DGS)
TPS2491DGSG4
9-V to 80-V hot swap controller with power limiting and Auto Retry
Texas Instruments10-VSSOP (DGS)
TPS2363PFBR
10.8-V to 13.2-V dual channelhot swap controller for PCIExpress
Texas Instruments48-TQFP (PFB)
LM5067MM-2/NOPB
-9-V to -80-V hot swap controller with power limiting
Texas Instruments10-VSSOP (DGS)
LM25069PMM-1/NOPB
2.9-V to 17-V hot swap controller with power limiting and power good
Texas Instruments10-VSSOP (DGS)
TPS2391DGKR
-36-V to -80-V hot swap controller with auto retry
Texas Instruments8-VSSOP (DGK)
TPS2391DGKRG4
-36-V to -80-V hot swap controller with auto retry
Texas Instruments8-VSSOP (DGK)
LM5060MM/NOPB
5.5-V to 65-V high side protection controller
Texas Instruments10-VSSOP (DGS)
TPS2301IPWR
3-V to 13-V dual channel hot swap with independent channel circuit breaking and power good
Texas Instruments20-TSSOP (PW)
LM25061PMM-1/NOPB
2.9V to 17V hot swap controller with power limiting and power good signal
Texas Instruments10-VSSOP (DGS)
LM25066IAPSQX/NOPB
2.9-V to 17-V hot swap controller with I2C and PMBus - increased monitoring accuracy and intel node
Texas Instruments24-WQFN (NHZ)
TPS24710DGS
2.5-V to 18-V hot swap controller with power limiting with fault output
Texas Instruments10-VSSOP (DGS)
TPS24701DGK
2.5-V to 18-V hot swap controller with soft-start
Texas Instruments8-VSSOP (DGK)
TPS2330IDR
3-V to 13-V hot swap controller with active low enable
Texas Instruments14-SOIC (D)
TPS2481PW
9-V to 80-V hot swap controller with I2C current monitor and Auto Retry
Texas Instruments20-TSSOP (PW)
TPS24713DGS
2.5-V to 18-V hot swap controller with power limiting with auto retry fault response
Texas Instruments10-VSSOP (DGS)
LM9061MX/NOPB
7-V to 26-V high side protection controller
Texas Instruments8-SOIC (D)
TPS2321IPWR
3-V to 13-V dual channel hot swap with active high enable
Texas Instruments16-TSSOP (PW)
TPS2391DGK
-36-V to -80-V hot swap controller with auto retry
Texas Instruments8-VSSOP (DGK)
TPS24700DGK
2.5-V to 18-V hot swap controller
Texas Instruments8-VSSOP (DGK)
TPS2490DGS
9-V to 80-V hot swap controller with power limiting and latch off
Texas Instruments10-VSSOP (DGS)
TPS2490DGSG4
9-V to 80-V hot swap controller with power limiting and latch off
Texas Instruments10-VSSOP (DGS)
TPS2482PW
9-V to 80-V hot swap controller with digital powermonitoring and latch off
Texas Instruments20-TSSOP (PW)
LM25069PMMX-2/NOPB
2.9-V to 17-V hot swap controller with power limiting and power good
Texas Instruments10-VSSOP (DGS)
TPS2390DGK
-36-V to -80-V hot swap controller with latch off
Texas Instruments8-VSSOP (DGK)
TPS2390DGKG4
-36-V to -80-V hot swap controller with latch off
Texas Instruments8-VSSOP (DGK)
TPS2390DGKR
-36-V to -80-V hot swap controller with latch off
Texas Instruments8-VSSOP (DGK)
TPS2320IDR
3-V to 13-V dual channel hot swap with active low enable
Texas Instruments16-SOIC (D)
TPS2399DGKR
-36-V to -80-V hot swap controller with enable
Texas Instruments8-VSSOP (DGK)
TPS24713DGSR
2.5-V to 18-V hot swap controller with power limiting with auto retry fault response
Texas Instruments10-VSSOP (DGS)
TPS2330IPWR
3-V to 13-V hot swap controller with active low enable
Texas Instruments14-TSSOP (PW)
TPS2330IPWRG4
3-V to 13-V hot swap controller with active low enable
Texas Instruments14-TSSOP (PW)
TPS2399DGK
-36-V to -80-V hot swap controller with enable
Texas Instruments8-VSSOP (DGK)
LM5067MM-1/NOPB
-9-V to -80-V hot swap controller with power limiting
Texas Instruments10-VSSOP (DGS)
TPS24720RGTR
2.5-V to 18-V hot swap controller with power limiting and current monitoring
Texas Instruments16-VQFN (RGT)
TPS2482PWR
9-V to 80-V hot swap controller with digital powermonitoring and latch off
Texas Instruments20-TSSOP (PW)
TPS2359RHHR
8.5-V to 15-V dual channel hot swap controller with Oring and Ad-VancedMC compliance
Texas Instruments36-VQFN (RHH)
TPS2331IPWR
3-V to 13-V hot swap controller with active high enable
Texas Instruments14-TSSOP (PW)
UCC2913DTR
Floating negative hot swap controller with industrial temp range with current limiting
Texas Instruments8-SOIC (D)
LM5068MMX-2/NOPB
-10V to -90V hot swap controller
Texas Instruments8-VSSOP (DGK)
TPS23521PWR
-10-V to -80-V hot swap controller with dual current limit and dual gate drive
Texas Instruments16-TSSOP (PW)
TPS2331ID
3-V to 13-V hot swap controller with active high enable
Texas Instruments14-SOIC (D)
LM25066IPSQE/NOPB
2.9-V to 17-V hot swap controller with I2C and PMBus with Intel node manager
Texas Instruments24-WQFN (NHZ)
LM25066IAPSQE/NOPB
2.9-V to 17-V hot swap controller with I2C and PMBus - increased monitoring accuracy and intel node
Texas Instruments24-WQFN (NHZ)
TPS24770RGER
2.5-V to 18-V hot swap controller with high performance and current monitoring
Texas Instruments24-VQFN (RGE)
UCC3918DPTR
3-V to 6-V hot swap controller
Texas Instruments16-SOIC (D)
TPS2456ARHHR
8.5-V to 15-V dual channelHot Swap with Oring and Impro-Ved Slew Rate Immunity
Texas Instruments36-VQFN (RHH)
TPS2481PWR
9-V to 80-V hot swap controller with I2C current monitor and Auto Retry
Texas Instruments20-TSSOP (PW)
TPS2350DR
-12-V to -80-V hot swap controller with Oring
Texas Instruments14-SOIC (D)

Fabricantes nesta categoria

Processo de qualidade conforme normas do setor

  1. Verificação de origemcredenciais do fornecedor, declaração de origem do lote, registros de cadeia autorizada (AS6081)
  2. Inspeção visual de entradamarcação, coplanaridade, oxidação, sinais de recondicionamento (IDEA-STD-1010-B)
  3. Raio-Xdie, fios de bonding e vazios comparados com amostra padrão (AS6171/4)
  4. Decap / teste com solventeabertura de amostra para marca do die; teste de marcação com acetona (IDEA-STD-1010-B)
  5. Teste funcional / elétricoparâmetros-chave em bancada ou laboratório independente (AS6171/6)
  6. Umidade e embalagemnível MSL, saco a vácuo, dessecante, indicador de umidade (JEDEC J-STD-020 / J-STD-033)
  7. Relatório de enviofotos de inspeção e número do relatório em cada lote (ISO 9001:2015)

O que acontece depois da sua solicitação

  1. 1. Primeira resposta em 2 horas úteis (UTC+8)
  2. 2. Cotação com preço, prazo, date code e Incoterm
  3. 3. Pagamento por T/T, PayPal, carta de crédito ou escrow
  4. 4. Fotos de inspeção antes do envio
  5. 5. Garantia de qualidade de 30 dias e política de devolução

Como comprar: condições de pagamento, Incoterms e garantia de 30 dias