Betrieben von ONE BOM LIMITED (Hongkong) · Teams in Shenzhen, Hongkong und den USAAntwort in 2 Geschäftsstunden (UTC+8)Jede Charge vor Versand geprüftTreuhandzahlung (Escrow) / PayPal / Akkreditiv / Vorkasse

Hot-swap controllers — verfügbare Bauteile

Stand 18. September 2026: TI-ADI (ONE BOM LIMITED) hat 219 verfügbare Bauteile der Kategorie Hot-swap controllers, davon 0 innerhalb von 7 Tagen lieferbar.

ArtikelnummerHerstellerGehäuseLieferzeit
LM5067MMX-2/NOPB
-9-V to -80-V hot swap controller with power limiting
Texas Instruments10-VSSOP (DGS)
TPS2491DGS
9-V to 80-V hot swap controller with power limiting and Auto Retry
Texas Instruments10-VSSOP (DGS)
TPS2491DGSG4
9-V to 80-V hot swap controller with power limiting and Auto Retry
Texas Instruments10-VSSOP (DGS)
TPS2363PFBR
10.8-V to 13.2-V dual channelhot swap controller for PCIExpress
Texas Instruments48-TQFP (PFB)
LM5067MM-2/NOPB
-9-V to -80-V hot swap controller with power limiting
Texas Instruments10-VSSOP (DGS)
LM25069PMM-1/NOPB
2.9-V to 17-V hot swap controller with power limiting and power good
Texas Instruments10-VSSOP (DGS)
TPS2391DGKR
-36-V to -80-V hot swap controller with auto retry
Texas Instruments8-VSSOP (DGK)
TPS2391DGKRG4
-36-V to -80-V hot swap controller with auto retry
Texas Instruments8-VSSOP (DGK)
LM5060MM/NOPB
5.5-V to 65-V high side protection controller
Texas Instruments10-VSSOP (DGS)
TPS2301IPWR
3-V to 13-V dual channel hot swap with independent channel circuit breaking and power good
Texas Instruments20-TSSOP (PW)
LM25061PMM-1/NOPB
2.9V to 17V hot swap controller with power limiting and power good signal
Texas Instruments10-VSSOP (DGS)
LM25066IAPSQX/NOPB
2.9-V to 17-V hot swap controller with I2C and PMBus - increased monitoring accuracy and intel node
Texas Instruments24-WQFN (NHZ)
TPS24710DGS
2.5-V to 18-V hot swap controller with power limiting with fault output
Texas Instruments10-VSSOP (DGS)
TPS24701DGK
2.5-V to 18-V hot swap controller with soft-start
Texas Instruments8-VSSOP (DGK)
TPS2330IDR
3-V to 13-V hot swap controller with active low enable
Texas Instruments14-SOIC (D)
TPS2481PW
9-V to 80-V hot swap controller with I2C current monitor and Auto Retry
Texas Instruments20-TSSOP (PW)
TPS24713DGS
2.5-V to 18-V hot swap controller with power limiting with auto retry fault response
Texas Instruments10-VSSOP (DGS)
LM9061MX/NOPB
7-V to 26-V high side protection controller
Texas Instruments8-SOIC (D)
TPS2321IPWR
3-V to 13-V dual channel hot swap with active high enable
Texas Instruments16-TSSOP (PW)
TPS2391DGK
-36-V to -80-V hot swap controller with auto retry
Texas Instruments8-VSSOP (DGK)
TPS24700DGK
2.5-V to 18-V hot swap controller
Texas Instruments8-VSSOP (DGK)
TPS2490DGS
9-V to 80-V hot swap controller with power limiting and latch off
Texas Instruments10-VSSOP (DGS)
TPS2490DGSG4
9-V to 80-V hot swap controller with power limiting and latch off
Texas Instruments10-VSSOP (DGS)
TPS2482PW
9-V to 80-V hot swap controller with digital powermonitoring and latch off
Texas Instruments20-TSSOP (PW)
LM25069PMMX-2/NOPB
2.9-V to 17-V hot swap controller with power limiting and power good
Texas Instruments10-VSSOP (DGS)
TPS2390DGK
-36-V to -80-V hot swap controller with latch off
Texas Instruments8-VSSOP (DGK)
TPS2390DGKG4
-36-V to -80-V hot swap controller with latch off
Texas Instruments8-VSSOP (DGK)
TPS2390DGKR
-36-V to -80-V hot swap controller with latch off
Texas Instruments8-VSSOP (DGK)
TPS2320IDR
3-V to 13-V dual channel hot swap with active low enable
Texas Instruments16-SOIC (D)
TPS2399DGKR
-36-V to -80-V hot swap controller with enable
Texas Instruments8-VSSOP (DGK)
TPS24713DGSR
2.5-V to 18-V hot swap controller with power limiting with auto retry fault response
Texas Instruments10-VSSOP (DGS)
TPS2330IPWR
3-V to 13-V hot swap controller with active low enable
Texas Instruments14-TSSOP (PW)
TPS2330IPWRG4
3-V to 13-V hot swap controller with active low enable
Texas Instruments14-TSSOP (PW)
TPS2399DGK
-36-V to -80-V hot swap controller with enable
Texas Instruments8-VSSOP (DGK)
LM5067MM-1/NOPB
-9-V to -80-V hot swap controller with power limiting
Texas Instruments10-VSSOP (DGS)
TPS24720RGTR
2.5-V to 18-V hot swap controller with power limiting and current monitoring
Texas Instruments16-VQFN (RGT)
TPS2482PWR
9-V to 80-V hot swap controller with digital powermonitoring and latch off
Texas Instruments20-TSSOP (PW)
TPS2359RHHR
8.5-V to 15-V dual channel hot swap controller with Oring and Ad-VancedMC compliance
Texas Instruments36-VQFN (RHH)
TPS2331IPWR
3-V to 13-V hot swap controller with active high enable
Texas Instruments14-TSSOP (PW)
UCC2913DTR
Floating negative hot swap controller with industrial temp range with current limiting
Texas Instruments8-SOIC (D)
LM5068MMX-2/NOPB
-10V to -90V hot swap controller
Texas Instruments8-VSSOP (DGK)
TPS23521PWR
-10-V to -80-V hot swap controller with dual current limit and dual gate drive
Texas Instruments16-TSSOP (PW)
TPS2331ID
3-V to 13-V hot swap controller with active high enable
Texas Instruments14-SOIC (D)
LM25066IPSQE/NOPB
2.9-V to 17-V hot swap controller with I2C and PMBus with Intel node manager
Texas Instruments24-WQFN (NHZ)
LM25066IAPSQE/NOPB
2.9-V to 17-V hot swap controller with I2C and PMBus - increased monitoring accuracy and intel node
Texas Instruments24-WQFN (NHZ)
TPS24770RGER
2.5-V to 18-V hot swap controller with high performance and current monitoring
Texas Instruments24-VQFN (RGE)
UCC3918DPTR
3-V to 6-V hot swap controller
Texas Instruments16-SOIC (D)
TPS2456ARHHR
8.5-V to 15-V dual channelHot Swap with Oring and Impro-Ved Slew Rate Immunity
Texas Instruments36-VQFN (RHH)
TPS2481PWR
9-V to 80-V hot swap controller with I2C current monitor and Auto Retry
Texas Instruments20-TSSOP (PW)
TPS2350DR
-12-V to -80-V hot swap controller with Oring
Texas Instruments14-SOIC (D)

Hersteller in dieser Kategorie

Qualitätsprozess nach Industrienormen

  1. HerkunftsprüfungLieferantenqualifikation, Herkunftserklärung je Charge, Nachweis der autorisierten Lieferkette (AS6081)
  2. Wareneingang SichtprüfungBeschriftung, Koplanarität, Oxidation, Spuren von Aufarbeitung (IDEA-STD-1010-B)
  3. RöntgenDie, Bonddrähte und Lunker im Vergleich zum Referenzmuster (AS6171/4)
  4. Decap / LösemitteltestStichproben-Öffnung zur Die-Kennung; Aceton-Beschriftungstest (IDEA-STD-1010-B)
  5. Funktions- / ElektroprüfungSchlüsselparameter am Messplatz oder im unabhängigen Labor (AS6171/6)
  6. Feuchte & VerpackungMSL-Stufe, Vakuumbeutel, Trockenmittel, Feuchteindikator (JEDEC J-STD-020 / J-STD-033)
  7. VersandberichtPrüffotos und Berichtsnummer zu jeder Charge (ISO 9001:2015)

So geht es nach Ihrer Anfrage weiter

  1. 1. Erste Antwort in 2 Geschäftsstunden (UTC+8)
  2. 2. Angebot mit Preis, Lieferzeit, Datecode und Incoterm
  3. 3. Zahlung per Treuhandzahlung (Escrow), PayPal, Akkreditiv oder Vorkasse
  4. 4. Prüffotos vor dem Versand
  5. 5. 30 Tage Qualitätsgarantie und Rückgaberecht

So kaufen Sie: Zahlungsbedingungen, Incoterms und 30-Tage-Garantie