Operado por ONE BOM LIMITED (Hong Kong) · equipos en Shenzhen, Hong Kong y EE. UU.Respuesta en 2 horas hábiles (UTC+8)Cada lote inspeccionado antes del envíoEscrow / PayPal / T/T / L/C

Hot-swap controllers — piezas en stock

Al 18 de septiembre de 2026, TI-ADI (ONE BOM LIMITED) tiene 219 piezas de Hot-swap controllers disponibles para la venta, de las cuales 0 pueden enviarse en 7 días.

Número de piezaFabricanteEncapsuladoPlazo de entrega
LM5067MMX-2/NOPB
-9-V to -80-V hot swap controller with power limiting
Texas Instruments10-VSSOP (DGS)
TPS2491DGS
9-V to 80-V hot swap controller with power limiting and Auto Retry
Texas Instruments10-VSSOP (DGS)
TPS2491DGSG4
9-V to 80-V hot swap controller with power limiting and Auto Retry
Texas Instruments10-VSSOP (DGS)
TPS2363PFBR
10.8-V to 13.2-V dual channelhot swap controller for PCIExpress
Texas Instruments48-TQFP (PFB)
LM5067MM-2/NOPB
-9-V to -80-V hot swap controller with power limiting
Texas Instruments10-VSSOP (DGS)
LM25069PMM-1/NOPB
2.9-V to 17-V hot swap controller with power limiting and power good
Texas Instruments10-VSSOP (DGS)
TPS2391DGKR
-36-V to -80-V hot swap controller with auto retry
Texas Instruments8-VSSOP (DGK)
TPS2391DGKRG4
-36-V to -80-V hot swap controller with auto retry
Texas Instruments8-VSSOP (DGK)
LM5060MM/NOPB
5.5-V to 65-V high side protection controller
Texas Instruments10-VSSOP (DGS)
TPS2301IPWR
3-V to 13-V dual channel hot swap with independent channel circuit breaking and power good
Texas Instruments20-TSSOP (PW)
LM25061PMM-1/NOPB
2.9V to 17V hot swap controller with power limiting and power good signal
Texas Instruments10-VSSOP (DGS)
LM25066IAPSQX/NOPB
2.9-V to 17-V hot swap controller with I2C and PMBus - increased monitoring accuracy and intel node
Texas Instruments24-WQFN (NHZ)
TPS24710DGS
2.5-V to 18-V hot swap controller with power limiting with fault output
Texas Instruments10-VSSOP (DGS)
TPS24701DGK
2.5-V to 18-V hot swap controller with soft-start
Texas Instruments8-VSSOP (DGK)
TPS2330IDR
3-V to 13-V hot swap controller with active low enable
Texas Instruments14-SOIC (D)
TPS2481PW
9-V to 80-V hot swap controller with I2C current monitor and Auto Retry
Texas Instruments20-TSSOP (PW)
TPS24713DGS
2.5-V to 18-V hot swap controller with power limiting with auto retry fault response
Texas Instruments10-VSSOP (DGS)
LM9061MX/NOPB
7-V to 26-V high side protection controller
Texas Instruments8-SOIC (D)
TPS2321IPWR
3-V to 13-V dual channel hot swap with active high enable
Texas Instruments16-TSSOP (PW)
TPS2391DGK
-36-V to -80-V hot swap controller with auto retry
Texas Instruments8-VSSOP (DGK)
TPS24700DGK
2.5-V to 18-V hot swap controller
Texas Instruments8-VSSOP (DGK)
TPS2490DGS
9-V to 80-V hot swap controller with power limiting and latch off
Texas Instruments10-VSSOP (DGS)
TPS2490DGSG4
9-V to 80-V hot swap controller with power limiting and latch off
Texas Instruments10-VSSOP (DGS)
TPS2482PW
9-V to 80-V hot swap controller with digital powermonitoring and latch off
Texas Instruments20-TSSOP (PW)
LM25069PMMX-2/NOPB
2.9-V to 17-V hot swap controller with power limiting and power good
Texas Instruments10-VSSOP (DGS)
TPS2390DGK
-36-V to -80-V hot swap controller with latch off
Texas Instruments8-VSSOP (DGK)
TPS2390DGKG4
-36-V to -80-V hot swap controller with latch off
Texas Instruments8-VSSOP (DGK)
TPS2390DGKR
-36-V to -80-V hot swap controller with latch off
Texas Instruments8-VSSOP (DGK)
TPS2320IDR
3-V to 13-V dual channel hot swap with active low enable
Texas Instruments16-SOIC (D)
TPS2399DGKR
-36-V to -80-V hot swap controller with enable
Texas Instruments8-VSSOP (DGK)
TPS24713DGSR
2.5-V to 18-V hot swap controller with power limiting with auto retry fault response
Texas Instruments10-VSSOP (DGS)
TPS2330IPWR
3-V to 13-V hot swap controller with active low enable
Texas Instruments14-TSSOP (PW)
TPS2330IPWRG4
3-V to 13-V hot swap controller with active low enable
Texas Instruments14-TSSOP (PW)
TPS2399DGK
-36-V to -80-V hot swap controller with enable
Texas Instruments8-VSSOP (DGK)
LM5067MM-1/NOPB
-9-V to -80-V hot swap controller with power limiting
Texas Instruments10-VSSOP (DGS)
TPS24720RGTR
2.5-V to 18-V hot swap controller with power limiting and current monitoring
Texas Instruments16-VQFN (RGT)
TPS2482PWR
9-V to 80-V hot swap controller with digital powermonitoring and latch off
Texas Instruments20-TSSOP (PW)
TPS2359RHHR
8.5-V to 15-V dual channel hot swap controller with Oring and Ad-VancedMC compliance
Texas Instruments36-VQFN (RHH)
TPS2331IPWR
3-V to 13-V hot swap controller with active high enable
Texas Instruments14-TSSOP (PW)
UCC2913DTR
Floating negative hot swap controller with industrial temp range with current limiting
Texas Instruments8-SOIC (D)
LM5068MMX-2/NOPB
-10V to -90V hot swap controller
Texas Instruments8-VSSOP (DGK)
TPS23521PWR
-10-V to -80-V hot swap controller with dual current limit and dual gate drive
Texas Instruments16-TSSOP (PW)
TPS2331ID
3-V to 13-V hot swap controller with active high enable
Texas Instruments14-SOIC (D)
LM25066IPSQE/NOPB
2.9-V to 17-V hot swap controller with I2C and PMBus with Intel node manager
Texas Instruments24-WQFN (NHZ)
LM25066IAPSQE/NOPB
2.9-V to 17-V hot swap controller with I2C and PMBus - increased monitoring accuracy and intel node
Texas Instruments24-WQFN (NHZ)
TPS24770RGER
2.5-V to 18-V hot swap controller with high performance and current monitoring
Texas Instruments24-VQFN (RGE)
UCC3918DPTR
3-V to 6-V hot swap controller
Texas Instruments16-SOIC (D)
TPS2456ARHHR
8.5-V to 15-V dual channelHot Swap with Oring and Impro-Ved Slew Rate Immunity
Texas Instruments36-VQFN (RHH)
TPS2481PWR
9-V to 80-V hot swap controller with I2C current monitor and Auto Retry
Texas Instruments20-TSSOP (PW)
TPS2350DR
-12-V to -80-V hot swap controller with Oring
Texas Instruments14-SOIC (D)

Fabricantes en esta categoría

Proceso de calidad según normas de la industria

  1. Verificación de origencredenciales del proveedor, declaración de origen del lote, registros de cadena autorizada (AS6081)
  2. Inspección visual de entradamarcado, coplanaridad, oxidación, señales de reacondicionamiento (IDEA-STD-1010-B)
  3. Rayos Xdie, hilos de bonding y vacíos comparados con muestra patrón (AS6171/4)
  4. Decap / prueba con solventeapertura de muestra para marca del die; prueba de marcado con acetona (IDEA-STD-1010-B)
  5. Prueba funcional / eléctricaparámetros clave en banco o laboratorio externo (AS6171/6)
  6. Humedad y empaquenivel MSL, bolsa al vacío, desecante, indicador de humedad (JEDEC J-STD-020 / J-STD-033)
  7. Informe de envíofotos de inspección y número de informe con cada lote (ISO 9001:2015)

Qué pasa después de enviar su solicitud

  1. 1. Primera respuesta en 2 horas hábiles (UTC+8)
  2. 2. Cotización con precio, plazo, date code e Incoterm
  3. 3. Pago por T/T, PayPal, carta de crédito o escrow
  4. 4. Fotos de inspección antes del envío
  5. 5. Garantía de calidad de 30 días y política de devolución

Cómo comprar: condiciones de pago, Incoterms y garantía de 30 días